Your cart is currently empty!
Climate control module / CTE / AH-L / ZR-320036
Controller CTE / AH-L: For controlling ETAvent fans 0 – 10 V/ 10 – 0 V output, ventilation flaps, heaters and external speed controllers.
1 in stock
Description
Equipment/features:
– Setpoint 0..40 °C, control range 2 – 20 K, min. and max. speed
– For humidity control: setpoint 0..100 % r.H.
– Alarm minimum 0..30 °C, alarm maximum 20..40 °C, alarm difference 0..5 K
– Automatic setback ON/OFF, setpoint adjustment in k/h, max. setpoint increase, minimum addition of ventilation when automatic setback is active – For washing mode: ventilation, heating, heating up – Saving of settings made with restore function – Query for ventilation when automatic setback is active. Setpoint increase, minimum addition of ventilation when automatic setback is active
– For washing mode: ventilation, heating, heating up
– Save settings made with restore function
– Query event memory (check of faults that have occurred)
– Minimum air switch-off ON / OFF
– Characteristic curve for 0 – 10 V (alternatively 0 – 10 V) outputs linear or preset in 6 points (e.g. sinusoidal characteristic curve for control points). e.g. sine characteristic for actuator 2 …
10 V)
– Inversion of the analog outputs and relay CTE / AH-L
– Speed specification and speed limitation can be set manually on the device (nmin / nmax)
– Integrated semiconductor fuse
Additional information
Weight | 1 kg |
---|---|
Matchcode | CTE / AH-L |
Product group | Climate control module |
Features | Max. Back-up fuse 10 A – Max. Power loss approx. 7 W – Integrated device fuse 0, 1 A (5×20 mm) – Max. permissible ambient temperature 55 °C – Permissible relative humidity 85 % non-condensing – Interference emission EN 61000-6-3 – Interference immunity EN 61000-6-2 |
Technical data | 1~230V, 50/60Hz, IP 54, 1, 2 kg |
Size (R=for pipe installation) / dimensions | Dimensions (W x H x D): 223 x 200 x 131 |